Smart Boost - zappi -32A1P1T05 Operation & Installation Manual

Smart Boost

The Smart Boost function will charge the EV with a minimum kWh figure by a set time. Smart Boost is available only in ECO and
ECO+ modes.
When in ECO or ECO+ mode, each press of the
Example: It's a sunny Sunday and you wish to ensure there is enough charge in the EV to get to work in the morning (e.g.
15kWh), but in the meantime, you want to use the surplus energy from the PV system to charge the car, so you choose to use
ECO+ mode. At sunset there was only 10kWh of charge accumulated. However, because you activated Smart Boost, and set
the time you needed to leave for work, zappi automatically boosted the charge in the night to top up the battery to the
required 15kWh by 7am.
Activating Smart Boost
1.
When charging in ECO or ECO+ mode, press
SMART BOOST is shown.
2.
The SMART BOOST icon will show including the set energy
amount in kWh s and the target time, (17kWh s and 7am
respectively, in this example screen shot).
3.
zappi will then test the EV for a few seconds, to determine
the maximum charge rate.
4.
The boost will start at the latest possible time to achieve
the set energy amount, if the current charge session has
already accumulated enough energy, the boost will not be
required and so will not operate.
The required energy and target time can be altered only when Smart Boost is not active. Theses settings are in the
Charge Settings/Smart Boost menu option.
operation and installation manual
button will cycle through the boost options as illustrated below:
Boost Smart Boost
until
Operation
Cancel Boost
zappi
13