Table of Contents
Advertisement
Operation
Status Screens
EV Disconnected
Waiting for Surplus...
Waiting for EV...
Paused...
Charging
Charge Complete
zappi
10
The EV is not connected to
In this example the last charging session delivered 20.8kWh of energy to
the EV and 80% of that energy came from the solar panels.
is waiting for sufficient surplus power from the microgeneration
zappi
system. This screen will be shown in ECO+ mode as it's only in this mode
that charging will stop if there is not enough surplus power.
The house in the centre is straight-faced as grid electricity is being used by
the house (0.9kW is this example).
is waiting for the EV to respond; the EV is not ready to accept
zappi
charge.
zappi
is paused for a few seconds in order to limit the start/stop
frequency during ECO+ mode charging.
The
Start/Stop
Delay
Settings/ECO+ Settings menu option.
The EV is charging.
In this example the car is charging in ECO+ mode at 1.6kW, there is no
import or export from the grid (0.0kW) and the EV battery has charged
by 8.9kWh since the car started.
The EV is fully charged.
The charge energy used during the last charge is displayed at the bottom
right (20.0kWh in this case) and the 'green contribution' is also shown
(40% in this example).
zappi
can be
changed
operation and installation manual
in the
Charge
Hide quick links:
Advertisement
Table of Contents
