Operation
Manual Boost
The Manual Boost function can only be used when charging in ECO or ECO+ mode. When boosting, the charge rate is set to
maximum (just like FAST mode), until a set amount of energy has been stored in the EV's battery. After which,
back to ECO or ECO+ mode.
This function is useful if you arrive home with an almost flat battery and would like to charge the vehicle immediately to ensure
there is enough charge for a short trip if needed.
The amount of energy (kWh s) the boost uses can be changed in the Charge Settings/Boost menu.
When in ECO or ECO+ mode, each press of the
Activating Boost
1.
When charging in ECO or ECO+ mode, press
BOOST is shown.
2.
The boost will start after a couple of seconds and the
display will show the remaining boost energy.
The boost duration can be altered (when a boost is not in progress) in the Charge Settings/Manual Boost menu
option.
Cancelling Boost
The boost can be cancelled by pressing
shown.
zappi
12
button will cycle through the boost options as illustrated below:
Boost
until Cancel Boost is
Smart Boost
until
operation and installation manual
zappi
will revert
Cancel Boost