Faults
If any of the following fault messages are displayed, follow the action described. However, if the problem persists, stop using
zappi
and call your installer or your local technical support.
Displayed
Message
Ground Fault!
Over Current!
Overheating!
operation and installation manual
Description
The internal Earth leakage protection has
tripped
The EV is drawing too much current – the
output is switched off
The zappi unit it too hot – the output is
switched off
Troubleshooting
Action
Unplug from the EV and press and hold the
button to reset the unit
Unplug from the EV and press and hold the
button to reset the unit
Unplug from the EV and press and hold the
button to reset the unit
Allow the unit to cool down before attempting
to charge again
zappi
33