Maintenance - Shark Rocket HV300REF User Manual

MAINTENANCE

EMPTY THE DUST CUP
Empty the dust cup when the debris reaches the MAX fill line.
1 Detach the handheld portion from the rest of the vacuum by pressing the colored button on the top of the tube to pull it away from the
handheld portion.
2 Holding the dust cup over a garbage bag or can, press the release button on the front of the dust cup. The bottom lid will open,
allowing the debris to fall out.
3 Clean the dust screen inside the dust cup as required.
CLEAN THE FILTERS
See cleaning schedule on page 2
4 Access the pre-motor filters by lifting the latch on the top of the handheld portion of the vacuum. Remove and rinse the foam and
felt filters every month. Let air dry completely before replacing. Hand wash only. Tap loose dirt off filters between washes as
needed. Insert the felt filter first and then place the foam filter on top of it.
5 Clean the post-motor filter once a year. Hand wash only. Let air dry completely before replacing.
3
2
1
Empty
8 0 0 .7 9 8 .7 3 9 8
Pre-motor filter
4
Post-motor filter
Foam
Felt
9