Flight Mode (Optional); The Receiver Tube - ReSound FT862-DRW User Manual

8.7

Flight mode (optional)

i
WARNING: When boarding a flight or entering an area where RF transmitters are prohibited, wire-
less functionality must be deactivated.
Your ReSound hearing aid allows you to control it from your smart phone or Remote Control 2. However,
in some areas you are requested to turn off wireless communication.
Follow these steps to turn off wireless mode:
1. For each hearing aid, open and close (open-close, open-close, open-close) the battery door three
times within a 10-second period.
2. Double-dings for ten seconds ( etc.) indicate that your hearing aid is in Flight mode.
Follow these steps to activate wireless mode:
1. For each hearing aid, open and close the battery door once.
2. Your hearing aids are in wireless mode after 10 seconds.
i
NOTE: Both hearing aids must be set in Flight mode - even with synchronisation enabled.
NOTE: It is important to wait an additional 15 seconds after wireless function resumes before
opening and closing the battery door again for any reason. Flight mode will resume if you open
and close the battery door during this 15-second window.
NOTE: Flight mode must be activated by your clinician in order to be controlled.
28
9

The receiver tube

The receiver tube contains the wiring to the receiver, which delivers the sound to the ear canal. It is im-
portant that the receiver tube and the receiver dome/RIE mould fits correctly in your ear. If the receiver
tube or the receiver dome/RIE mould irritates your ear in any way and prevents you from wearing your
hearing aid, please contact your hearing care professional.
You should never attempt to modify the shape of the receiver tube yourself. The receiver tube and the
receiver dome/RIE mould should be cleaned regularly.
Please see cleaning instructions in chapter 12.2 – 12.4.
29