Copying From A Camcorder - Samsung DVD-TR520 Instruction Manual

3
Press the REC MODE button repeatedly, (or press
the REC MODE button, then press the ...† buttons)
to select the recording speed (quality).
SP LP EP
Record Mode SP 031:39
Press the REC button.
4
Information concerning the external input mode is
displayed on the screen, then recording begins.
Icon( ) is displayed on the front panel.
- To pause recording -
• Press the REC PAUSE button to pause a recording
in progress.
• Press the REC PAUSE button again during pause to
resume recording.
• You can switch channels by pressing the
CH ( ) buttons while recording pauses.
- To stop recording -
Press the STOP ( ) button to stop or finish a
recording in progress.
• When using DVD-RAM/-RW/-R discs, the
message "Updating the information of disc.
Please wait for a moment" is displayed.
XP

Copying from a Camcorder

You may control the Camcorder using the IEEE1394 (DV)
interface.
Connect the DV output jack of your camcorder to the
1
DV input jack on the front of your TWIN TRAY DVD
RECORDER using a DV cable.
2
Press the RECORDER button on the front panel or R
button on the remote control. Press the OPEN/CLOSE
button and place a recordable disc on the disc tray.
Press the OPEN/CLOSE button to close the disc tray.
Wait until LOAD disappears from the front panel display.
3 Press the REC MODE button repeatedly to select
the recording speed(quality).
SP LP EP
Record Mode SP 031:39
XP
English - 75