Copying From A Camcorder - Samsung DVD-R157 Instruction Manual

Record Mode
DV
The DV device is connected
MOVE SELECT
Downloaded From Disc-Player.com Samsung Manuals
You may control a Digital Camcorder using the IEEE1394 (DV)
interface.
XP (01:11)
Before you start
Check that the disc has enough available space for the recording.
Adjust the record mode. See page 25 to see how to connect the
camcorder to your DVD recorder.
1. Press the OPEN/CLOSE button, and place a recordable disc on the
2. Press the OPEN/CLOSE button to close the disc tray.
3. Press the REC MODE button repeatedly to select the recording
RETURN
4. Press the INPUT SEL. button to select DV.
5. Select the PLAY (
6. To start recording, select REC(
To stop recording
Press the STOP (
• When using DVD-RAM/DVD±RW/ DVD±R discs, the message 'Updating

Copying from a Camcorder

disc tray.
Wait until "LOAD" disappears from the front panel display.
speed(quality).
SP LP EP XP
If the input is set to DV, a playback/record menu that enables Digital
camcorder control appears on the top of the screen.
) icon on the upper part of the screen to playback
the camcorder and fi nd the starting position to copy.
using the ◄ ► buttons, then press the ENTER button.
) button to stop or fi nish recording in progress.
the information of disc. Please wait for a moment' is displayed.
■ You can not change the record mode and input source while
recording.
■ Recording will stop automatically if there is no free space left for
recording.
■ Up to 99 titles can be recorded onto a DVD-RAM/-RW/-R disc,
and up to 48 titles onto a DVD+RW/+R disc.
■ DVD-RAM/DVD±RW/ DVD+R discs must be formatted before
starting to record.
Most new discs are sold unformatted.
■ Do not use DVD-R authoring discs with this unit.
■ To access on-screen controls during recording, press the ◄ or ►
buttons.
■ When copying from a camcorder and the end of the tape is
reached (no Video), the screen may turn blue or purple.
English - 41
) icon in the top side of the screen