Samsung DVD-TR520 Instruction Manual page 11

You can only use either the VR or Video
mode on a DVD-RW, but not both at the
NOTE
same time.
You can change the DVD-RW format to
another format by reinitializing. It should
be noted that the disc's data will be lost
when changing formats.
Step 3
Recording
There are two different recording methods, Direct
Recording and Timer Recording. Timer recording is
classified as a Date : Once, Daily or Weekly.
Recording mode : XP (high quality mode), SP
(standard quality mode), LP (long recording mode),
and EP (extended mode) according to the recording
mode. When recording is set in the FR(Flexible
recording mode), the best quality picture is recorded
with regards to the remaining time on the disc and
length of the Timer Recording.
During recording, a title is created between two
points where you start and stop recording.
Chapters will be created automatically when you
finalize recording on DVD-RW/-R discs in Video
mode.
The chapter's length (interval between chapters)
varies according to the recording mode.
Step 4
Playing
You can select the title you want to play in a
displayed menu and then immediately start
playback.
A DVD consists of sections, called titles, and sub
sections, called chapters.
Step 5
Editing a recorded disc
Editing on discs is easier than conventional video
tapes. The TWIN TRAY DVD RECORDER supports
many different edit functions, possible only with DVDs.
With a simple and easy edit menu, you can operate
various edit functions, such as delete, copy, rename,
lock, etc., on a recorded title.
Creating a playlist (DVD-RAM/-RW in VR mode.)
With this TWIN TRAY DVD RECORDER you can
create a new playlist on the same disc and edit it
without the change of the original recording.
The Edit functions of the Title List and
Playlist are available only in the R Tray.
NOTE
Finalizing & Playing on
Step 6
other DVD components
To play your DVD on other DVD components,
finalizing may be necessary. First, finish all editing and
recording operations, then finalize the disc.
When using a DVD-RW disc in VR Mode
Although finalizing is generally unnecessary when
playing the disc on a VR Mode compatible
component, a finalized disc should be used for
playback on that type of component.
When using a DVD-RW disc in Video Mode
The disc should be finalized first to enable playback
on anything other than this TWIN TRAY DVD
RECORDER. No more editing or recording can be
made on the disc once it has been finalized.
To enable recording on the disc again, disc should be
unfinalized.
When using a DVD-R disc
You should finalize the disc to play it on a component
other than this TWIN TRAY DVD RECORDER. You
cannot edit or record on the disc once it has been
finalized.
P tray can play finalized DVD-R or DVD-
RW(V) discs. If you want to play
NOTE
unfinalized DVD-R or DVR-RW(V) discs,
they must be inserted in the R tray.
English - 11