Service Schedule - Windsor NuWave Operating Instructions Manual

Maintenance

Service Schedule

MAINTENANCE
Check bag and replace if necessary
Check filters and replace if necessary
Check hoses for wear, blockages, or damage
Inspect base for clogs
Check vac nozzle for clogs; remove clogs with
fingers (if appropriate)
Check major gaskets for leakage
Check brush-should be clean with no lint or
strings attached
Wind cord and store in upright position
Remove bearing cap from end of brush. Clean
bearing and cap.
Check hoses for cracks or holes
Check all cords and handles for damage or
cracks; replace as necessary
Check brushes for wear; replace if necessary
Check brush strip for wear; replace if necessary
Inspect and replace all filters including exhaust,
intake
Inspect, clean, and repair power head - including
brush housing
Check all bearings for fiber build-up and noise
Check all gaskets for wear and leakage
Check belts for wear; replace if necessary
Check vac motor carbon brushes
Check for arcing and pitting on any electrical
contacts; replace if found
Inspect and clean vac deck; check for dents and
damage which would detrimentally effect vacuum
and brush movement
Check overall performance of machine
22
DAILY
*
*
*
*
*
*
*
*
*
86400820 Operators Manual - NuWave
WEEKLY MONTHLY
*
*
*
*
*
*
*
*
*
QUARTERLY
*
*
*
*