Leckey Horizon User Manual page 5

Multi-tool
A number of adjustments will require the
use of the multi-tool, which is supplied with
each product.
Charging the battery
Before the product is used for the first time
it is recommended to charge the battery
fully for at least 12 hours. To charge the
battery (a), plug the adaptor into the mains
socket, attach the lead to the frame and
switch on the mains power. While charging,
the charger LED will remain orange and
will turn to green when fully charged. When
charged switch off mains power, remove
the adaptor plug and disconnect the lead
from the frame. The battery charge should
be topped up each day for approximately
one hour.
If the battery is low in power an audible
bleep will sound indicating that it needs
to be charged. 'Battery low' will also be
indicated on both handset and control box
(b).
Setting the Angle
Whether used in supine or prone the frame
angle can be easily adjusted with the push
button control handset or the control box.
Use angle indicator on frame for guidance.
Ensure that the product and user are away
from surrounding furnishings to prevent
possible collisions when adjusting the
angle.
Safety first
Keep polythene bags away from children.
B
7.1 How to attach the
tray in prone standing
The tray is attached to and removed from
the frame by sliding the square metal tube into
the top of the main spine. Before you insert
the tube unlock the locking lever (a), insert the
tube and relock the lever.
To lock the tray and set its height push the
locking lever (a) down until it touches the metal
spine. After use the locking lever needs to be
fine tuned to ensure secure locking. To do
this lift up the lever and turn the nut (b) while
holding the lever in a fixed position. Push the
lever back down to check if it locks the tube
securely. Repeat the process as necessary.
A
B
Always use caution when making
this adjustment, as fingers could
become trapped in the receiving
tube while positioning.
A