Leckey Horizon User Manual page 10

8.6 Adjusting the 3D
Footplates
Loosen the three screws at the bottom of
the ball and socket joint (a). Swivel and
adjust footplate to required position and
tighten screws.
The footplate can also be adjusted to
accomodate leg position by loosening
screw (b) then you can slide left, right,
backwards and forwards. To move
footplate up and down, loosen the screw at
the front of the footplate, slide into position
and retighten (c).
A
B
8.7 Positioning the Sandals
Each sandal is attached to the
individual footplate with a single fixing
bolt. The footplate is covered with a rubber
pad to ensure the sandals do not slide
when secured. If you wish to rotate the
sandal laterally, simply loosen the knob,
place in the required position and then re-
tighten the knob securely (a).
Use caution when lifting and
lowering the footplate as fingers
could become trapped.
C
A