Operation Guide; Replacement Of Batteries In Remote Controller - Inverter MINI SPLIT Owner's Manual And Installation Manual

Operation guide

1. After putting through the power, press "
turn on the air conditioner.
2. Press " " button to select your required mode: AUTO, COOL, DRY, FAN,
MODE
HEAT.
3. Press "+" or "-" button to set your required temperature. (Temperature can't be
adjusted under auto mode).
4. Press " " button to set your required fan speed: auto, low, medium and
FAN
high speed.
5. Press " " button to select fan blowing angle.

Replacement of batteries in remote controller

1. Press the back side of remote controller marked
the cover of battery box along the arrow direction.
2. Replace two 7# (AAA 1.5V) dry batteries, and
make sure the position of "+" polar and "-" polar
are correct.
3. Reinstall the cover of battery box.
NOTICE
window on indoor unit.
The distance between signal sender and receiving window should be no
more than 26.2ft (8m), and there should be no obstacles between them.
or wireless telephone; remote controller should be close to indoor unit during
operation.
batteries.
replace batteries.
" button on remote controller to
ON/OFF
signal sender
s no display, please
13
battery
reinstall
remove
Cover of battery box