Inverter MINI SPLIT Owner's Manual And Installation Manual page 12

Introduction for buttons on remote controller
Note:
Temperature setting range on remote controller: 60.8~86°F (16~30°C). Fan
speed setting range: auto, low speed, medium speed and high speed.
3
"+" or "-" button
After each pressing of "+" or "-" button, it can increase or decrease set temper-
ature 33.8°F(1°C) . Hold "+" or "-" button, 2s later, set temperature on remote
controller
will change quickly. After reaching to your required time, loosen the button.
Temperature indicator on indoor unit will also change accordingly. (Temperature
can't be adjusted under auto mode)
TIMER ON, TIMER OFF or Clock setting, you can press "+"or "-" button to
adjust time. (Refer to TIMER button for details)
4
FAN button
Pressing this button can set fan speed circ
medium( ), high(
Note:
low speed) according to ambient temperature.
5
button
defaults to simple swing condition.
simple swing and static swing;
changes as below:
position.
).
Auto
blinks for 2 seconds.
no display
at current position)
ded by indoor ambient temperature)
d.
9