Related Manuals for tau ZIPPO
Summary of Contents for tau ZIPPO
- Page 1 USE AND MAINTENANCE MANUAL ZIPPO Automations for swing gates IT - Istruzioni originali Via Enrico Fermi, 43 - 36066 Sandrigo (VI) Italia Tel +39 0444 750190 - Fax +39 0444 750376 - info@tauitalia.com - www.tauitalia.com...
- Page 2 English The data described in this handbook are purely a guide. TAU reserves the right to change them in any moment. The manufacturer reserves the right to modify or improve products without prior notice. Any inaccuracies or errors found in this handbook will be corrected in the next edition.
- Page 3 Industrial environment complete with: Model: ZIPPO XL Type: ZIPPO XL / XLB / XLB-R Serial number: SEE SILVER LABEL Commercial name: AUTOMATION FOR INDUSTRIAL DOORS Has been produced for incorporation on an access point (industrial door) of for assembly with other devices used to move such an access point, to constitute a machine in accordance with the Machinery Directive 2006/42/EC.
- Page 4 1_ CONDITIONS OF USE Keep the instructions in a safe place for future consultation. The ZIPPO XL automation for swing gates has been designed for This product has been designed and constructed exclu- sively for the use specified in this documentation. Any other industrial and domestic use.
- Page 5 To apply the articulated arm to the motorgear, proceed as follows: 1_ Insert the operator lever D on the drive shaft and fix the articu- The ZIPPO XL automation has been designed for swing gates lated joint through the provided screw and nut E (picture 5) with leaves max.
- Page 6 If some components cannot be removed or are damaged, re- place. GUARANTEE: GENERAL CONDITIONS TAU guarantees this product for a period of 24 months from the date of purchase (as proved by the sales document, receipt or invoice). This guarantee covers the repair or replacement at TAU’s ex- pense (ex-works TAU: packing and transport at the customer’s...
- Page 7 A= 300 mm MAX B= 500 mm MAX C= 40 mm D= 170° MAX L= 1750 mm MAX fig. / pic. # / Abb. / image / imagen 2 ZIPPO XL ZIPPOXL DISEGNI - DRAWINGS - ZEICHNEN - PROJETS - DIBUJOS...
- Page 8 / pic. # / Abb. / image / imagen 5 fig. / pic. # / Abb. / image / imagen 7 fig. / pic. # / Abb. / image / imagen 8 ZIPPO XL ZIPPOXL DISEGNI - DRAWINGS - ZEICHNEN - PROJETS - DIBUJOS...
- Page 9 Phase2 + cond + com FCF (gris) Fase2 + cond + com FCC (gris) fig. / pic. # / Abb. / image / imagen 9 MOTORE ZIPPO XL VISTO DALL’ALTO - ZIPPO XL OPERATOR (TOP VIEW) Camma di chiusura Cam closing...
- Page 10 / pic. # / Abb. / image / imagen 11 IMPIANTO TIPO CON ANTE BATTENTI DALL'INTERNO - INSTALLATION TYPE INSIDE_SWNG LEAFS IMPIANTO TIPO CON ANTE BATTENTI DALL'ESTERNO - INSTALLATION TYPE OUTSIDE_SWING LEAFS 1 Motore ZIPPO XL 2 Centrale di comando 3 Coppia di fotocellule a parete...
- Page 11 IMPIANTO TIPO CON CANCELLO A 4 ANTE - RESIDENTIAL FOLDING GATE. TYPICAL INSTALLATION 1 Motore ZIPPO XL 2 Centrale di comando 3 Fotocellule a parete 4 Lampeggiante e antenna 5 Coppia di fotocellule su colonnina fig. / pic. # / Abb. / image / imagen 13...
- Page 12 Via Enrico Fermi, 43 36066 Sandrigo (VI) - Italy Tel +39 0444 750190 Fax +39 0444 750376 info@tauitalia.com www.tauitalia.com...