Kenwood DDX419BT Instruction Manual page 12

Disc Disc
Selecting a folder/track on the list
1
Display the folder/track list.
On the source control screen, touch as follows:
2
Select the folder ( 1 ), then the item (
the selected folder.
DISC
Folder Name 1 File Name 1
Folder Name 2 File Name 2
Folder Name 3 File Name 3
Folder Name 4 File Name 4
Folder Name 5 File Name 5
Select an item in each layer until you reach and
select the desired file.
Settings for disc playback
• Available items shown on the <DISC Mode> screen
differ depending on the type of disc/file being
played back.
1
Display the <DISC Mode> screen.
On the source control screen, touch as follows:
10 ENGLISH
2
Make the settings.
DISC Mode
Menu Language
Subtitle Language
Audio Language
Dynamic Range Control
Dolby Surround
Down Mix
Screen Ratio
2 ) in
<Menu Language>*1
Select the initial disc menu language. (Initial:
English)
<Subtitle Language>*1
Select the initial subtitle language or turn subtitles
off (Off). (Initial: English)
<Audio Language>*1
Select the initial audio language. (Initial: English)
<Dynamic Range Control>
You can change the dynamic range while playing
Dolby Audio encoded discs.
• Wide: Reproduces powerful sound at a low
volume level with its full dynamic range.
• Normal: Reduces the dynamic range a little.
• Dialog (Initial): Reproduces movie dialog more
clearly.
English SET
English SET
SET
English
Dialog
Stereo
16:9
<Down Mix>
When playing back a multi-channel disc, this
setting affects the signals reproduced through the
front and/or rear speakers.
• Dolby Surround: Reproduces multi-channel
surround sound by connecting an amplifier
compatible with Dolby Surround.
• Stereo (Initial): Reproduces stereo playback
sound.
<Screen Ratio>
Select the monitor type to watch a wide screen
picture on the external monitor.
16:9 (Initial) 4:3 LB 4:3 PS
<File Type>*2
Select the playback file type when a disc contains
different types of files.
• Audio: Plays back audio files.
• Still image: Plays back still picture files.
• Video: Plays back video files.
• Audio&Video (Initial): Plays back audio files and
video files.
*1 For list of language codes, see page 46.
*2 For playable file types, see page 45.
If the disc contains no files of the selected type, the existing
files are played in the following priority: audio, video, then still
picture. You can change these settings only while playback is
stopped.