Data Security - Samsung OFFICESERV 7100 Description

CUSTOMER SET RELOCATION
Customer Set Relocation allows the customer to exchange or swap similar stations in the OfficeServ 7100
without wiring changes. All individual station assignments such as trunk ring, station group, station COS, sta-
tion speed dial, button appearances, call forwarding, etc. will follow the Customer Set Relocation program.

DATA SECURITY

Single line extensions used with modems and facsimile machines can be programmed so that they will not
receive any system-generated tones that would disrupt data transmissions. In addition, these devices receive
DCS C.O. ringing pattern instead of intercom ring pattern. Devices connected to an SLI card receive a discon-
nect signal upon termination.
DATABASE PRINTOUT
A copy of the customer database can be obtained by using the Web Management program.This information
can be directed to a printer or the PC screen and may be done either on-site or remotely. A complete data-
base or specific data blocks may be obtained.
DAYLIGHT SAVING TIME-AUTOMATIC
The system has a table that can be programmed with the daylight savings change dates for up to 10 years.
At 2:00 am on these dates the system will automatically adjust the system clock to match daylight savings
time. If no dates are programmed the clock will not change.
DIALED NUMBER IDENTIFICATION SERVICE (DNIS)
When DNIS service is provided on an incoming E&M trunk the OfficeServ 7100 can route calls based on the
numbers received. (See DID).
DIRECT IN LINES
Outside lines may be programmed to bypass the operator(s) and ring directly at any station or group of sta-
tions.
DIRECT INWARD DIALING (DID/DDI) (ISDN PRI Service Only)
The term Direct Inward Dialing refers to types of digit steered inbound call handling.These are DID, Both Way
DID, Dialed Number Identification service (DNIS) and Direct Dial In (DDI). The OfficeServ 7100 supports the
types described below.
Direct Dial In (DDI). This is the name given to DID, Bothway DID, and DNIS services when they are provided
over an ISDN PRI circuit.
The OfficeServ 7100 has an option to select which MOH source is played to callers to a specific DID number.
DID/DDI Call Limits
This option defines the maximum number of simultaneous calls that the system will accept for each DID
number. Any call attempts after the Maximum Call (MC) count has been reached will be rejected and busy
tone returned.
DIRECT INWARD SYSTEM ACCESS (DISA)
Users can call in on specific DISA lines at any time, input a security code and receive system dial tone. Users
can now place internal calls or if permitted, calls using C.O. lines. The caller must have a tone dial phone and
know his/her DISA security code if DISA security codes/passcodes are turned on. DISA lines can be used as
T1/E&M not supported on OfficeServ 7100.
4.14
Home Page
[NOT USED IN THE US]
Table of Contents