Samsung OFFICESERV 7100 Description page 10

Figure 1-6 indicates the physical and virtual hardware ports used to support each system device type.
ITEM
Max # of Analog Trunk Ports
Max # of Digital Trunk Ports
PRI ONLY. (T1 not supported)
Max # of SIP Trunk Ports
Max # of H.323 Trunk Ports
Max # of SPNet Trunk Ports
MAX # OF TRUNKS CANNOT EXCEED 24.
Max # of Analog Sets
Max # of Digital Sets
Max # of Samsung IP Phone Ports
Max # of Samsung Softphone
Max # of WLAN Phone Ports
Max # of SIP Station Ports
MAX # OF STATION PORTS CANNOT EXCEED 32.
Max # of VM Ports
MAX STATION + TRUNKS + VOICEMAIL
Max # of MGI Ports
MAX # OF MGI PORTS CANNOT EXCEED 24.
Max # of Virtual SLI Ports
Max # of Virtual DLI Ports
MAX # OF VIRTUAL ANALOG + DIGITAL STATION PORTS CANNOT EXCEED 24.
Max # of Network Nodes
Max # of Station Group Members
Max # of Virtual Ports Supported
MAXIMUM #
20 4TRM and/or 8TRK
23 TEPRIa = 23 (23B + D)
16 2 virtual slots x 8 ports = 16
24 3 virtual slots x 8 ports = 24
24 3 virtual slots x 8 ports = 24
24 4SLM, 8SLI and/or 16MWSLI
24 4DLM, 8DLI, 8COMBO and/or 16DLI
32 4 virtual slots x 8 ports = 32
32 4 virtual slots x 8 ports = 32
24 3 virtual slots x 8 ports (SMT-W5100E) = 24
32 4 virtual slots x 8 ports = 32
4 Embedded on the MP10a
60
32 STATIONS + 24 TRUNKS + 4 VM = 60
8 MGI Embedded (MP10a), requires MGI
24
license and/or MGI-16 card
24 3 virtual slots x 8 ports = 24
24 3 virtual slots x 8 ports = 24
99 Using SPNet over IP
32 Any ring type.
96 8 channels x 3 slots x 4 cabinets = 96
1.6
Home Page
AVAILABLE HARDWARE
FIGURE 1-6
Table of Contents