Subscribe to Our Youtube Channel
Related Manuals for pro bel V6153
Summary of Contents for pro bel V6153
- Page 1 V6153 HD 1:8 SDI Distribution Amplifier V6154 HD 1:16 SDI Distribution Amplifier User Guide Issue: 2.0 © Pro-Bel Ltd www.pro-bel.com...
-
Page 2: Table Of Contents
Vistek V6153,V6154 HD DAs Contents Description Installation V6153 Front Panel V6154 Front Panel V6153 Rear Panel V6154 Rear Panel Power Consumption Insertion Delay Operation General Link Setting ASI Signals DART Controls HU-V6153&V6154... -
Page 3: Description
V6154 has sixteen outputs. The V6153 is a single width module, while the V6154 is a double width module, requiring a pair of rear modules. Unlike some double width modules the pair of rears does not need to be bound together, although the rear overlay covers both actual rears. -
Page 4: Installation
Vistek V6153,V6154 HD DAs Installation V6153 Front Panel The REM LED indicates that the module/control system communications link is active. The +V LED indicated that power is applied to the module. The SD LED indicates that the serial digital video input has been detected as a Standard Definition signal. -
Page 5: V6154 Front Panel
Vistek V6153,V6154 HD DAs V6154 Front Panel The REM LED indicates that the module/control system communications link is active. The +V LED indicated that power is applied to the module. The SD LED indicates that the serial digital video input has been detected as a Standard Definition signal. -
Page 6: V6153 Rear Panel
Vistek V6153,V6154 HD DAs V6153 Rear Panel V16HR3F SIGNAL SOURCE COMMENTS HD/SD-SDI SDI Video I/P Sourcing cable length up to 200m @ 270Mbit/s HD/SD-SDI 1 to 8 8 SDI Video Outputs SDI Outputs HU-V6153&V6154... -
Page 7: V6154 Rear Panel
Vistek V6153,V6154 HD DAs V6154 Rear Panel 2 x V16HR3F SIGNAL SOURCE COMMENTS HD/SD-SDI SDI Video I/P Sourcing cable length up to 200m @ 270Mbit/s HD/SD-SDI 1 to 16 16 SDI Video Outputs SDI Outputs Issue 2.0... -
Page 8: Power Consumption
Vistek V6153,V6154 HD DAs Power Consumption Module Power V6153 <5W V6154 <5W Insertion Delay SIGNAL DELAY <5ns <20ns HU-V6153&V6154... -
Page 9: Operation
Re-clocker ASI Signals Although the V6153 and V6154 are essentially SDI DAs, they can be used for ASI signals on some outputs. The main difference between an ASI signal and a pure SDI signal is that SDI is polarity independent while ASI signals are not. (There are other technical differences, but this is the critical one which directly affects the signal integrity.) -
Page 10: Dart Controls
Vistek V6153,V6154 HD DAs DART Controls This unit has no remote controls, but does have remote status indication as follows: · Input Locked · SD or HD · Re-locker – ON or OFF · SDI Standard – 143, 177, 270, 360, 540 or 1485 Mb/s ·...
Need help?
Do you have a question about the V6153 and is the answer not in the manual?
Questions and answers