pro bel ICO-3404-2000 Technical Manual

Ico 3404 series serial digital video distribution amplifier

Advertisement

Digital Video Non-reclocking DA
Contents
1
2
2.1
2.2
3
4
5
Technical Manual
2
3
3
4
5
6
7
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ICO-3404-2000 and is the answer not in the manual?

Questions and answers

Summary of Contents for pro bel ICO-3404-2000

  • Page 1 Digital Video Non-reclocking DA Contents Introduction Configuration and operation Selecting the rear connector Trouble shooting Status monitoring Specification Ordering information Technical Manual...
  • Page 2: Introduction

    3404 Introduction The 3404 is a serial digital video distribution amplifier designed to be used in the ICON series of 1RU or 3RU frames. It offers up to ten non-reclocked and equalised serial digital outputs and takes both 20mm and 30mm rear connectors. The module can also be used with most unbalanced data signals, including SDTI, ASI and MADI.
  • Page 3: Configuration And Operation

    Digital Video Non-reclocking DA Configuration and operation Selecting the rear connector The 3404 may be used with either the 20mm K3404.2 rear connector providing five outputs or the 30mm K3404.3 rear connector providing ten outputs. Only the first five, non-inverting outputs can be used for ASI. (Although many products can cope with ASI if it is inverted, this cannot be guarenteed).
  • Page 4: Trouble Shooting

    3404 Trouble shooting Half the outputs appear not to work • check that only the non-inverting outputs (1 to 5) are used for ASI signals The Power LED is not lit • check mains power to the frame is turned on •...
  • Page 5: Status Monitoring

    The 3404 module will provide the following information to the COSMOS status monitoring controller (if fitted): • module present • module type • module bar code • module issue no For further details of the Pro-Bel status monitoring system please refer to the COSMOS status monitoring manual. Technical Manual...
  • Page 6: Specification

    3404 Specification Inputs Number and type: One serial digital video input to EBU Tech 3267E, SMPTE 259M - ABCD or ASI (EN 50083-9) Impedance: 75W unbalanced Data rate: 3 Mbit/s to 400 Mbit/s (continuous) Outputs Number and type: Ten as input, equalised, only 5 available with 20mm BNC rear panel Compatibility: All outputs are compatible with SDI/SDTI.
  • Page 7: Ordering Information

    Digital Video Non-reclocking DA Ordering information Part number Description 5 output non-reclocking SDI/ASI DA, 20mm ICO-3404-2000 10 output non-reclocking SDI DA, 30mm ICO-3404-3000 10 output SMB non-reclocking SDI DA, 20mm ICO-3404-2M00 Issue 2...

This manual is also suitable for:

Ico-3404-3000Ico-3404-2m00

Table of Contents