Connecting Audio From External Components - Samsung HT-TX72 Instruction Manual

HDMI Function
(Con't)
Using Anynet+(HDMI-CEC)
Anynet+ is a function that enables you to control other Samsung Devices with your Samsung TV's remote control, Anynet + can be used
by connecting this Home Theater to a SAMSUNG TV using an HDMI Cable. This is only available with SAMSUNG TVs that support Anynet+.
1
Connect the main unit of the Home Theater to a Samsung TV with
an HDMI cable. (See page 19)
2
Set the Anynet+ function on your TV.
(See the TV instruction manual for more information.)
You can operate the Home Theater by using the TV remote control.
(Available TV buttons :
If you select TV
Set the Anynet+(HDMI-CEC) function to <On> on your TV.
<Receiver : On> : You can listen to audio through the Home Theater.
<Receiver : Off> : You can listen to audio through the TV.
MOVE ENTER EXIT
MOVE ENTER EXIT
If you select the THEATER
Select <THEATER to connector> and set the option of each items below.
<View TV> : If Anynet+(HDMI-CEC) set to on and you select View TV, the Home Theater will
<THEATER Menu> : You can access the Home Theater menu.
<THEATER Operation> : The Home Theater disc playback information will be displayed.
MOVE ENTER EXIT
<Receiver : On> : You can listen to audio through the Home Theater.
<Receiver : Off> : You can listen to audio through the TV.
• When selecting View TV, you must have a digital optical cable connected from
the TV to the Home Theater to listen to the TV sound through the Home Theater.
• If Anynet+ (HDMI-CEC) is on and you turn off the main unit, your TV will also turn off.
• Anynet+ (HDMI-CEC) will only work while in the DVDmode.
With Anynet+
You can operate this unit, power on your TV, or watch a movie by pressing the Play button on
your Samsung TV's remote control.
22
, , , , , and , buttons, ~
automatically switch to DIGITAL IN.

Connecting Audio from External Components

AUX1 : Front Panel
button)
AUX1 : Connecting an External Component/MP3 player
Components such as an MP3 Player
1
Connect AUX IN 1 (Audio) on the Home Theater to the Audio Out of the external component/MP3 player.
2
Press the AUX button on the remote control to select <AUX1> input.
You can also use the FUNCTION button on the main unit.
The mode switches as follows : DVD/CD
AUX2 : Connecting an External Analog Component
Analog signal components such as a VCR.
1
Connect the AUX IN 2 (Audio) on the Home Theater to the Audio Out of the external analog component.
Be sure to match connector colors.
2
Press the AUX button on the remote control to select <AUX2> input.
You can also use the FUNCTION button on the main unit.
The mode switches as follows : DVD/CD
• You can connect the Video Output jack of your VCR to the TV, and connect the Audio Output jacks of the VCR to
this product.
AUX2 : Rear Panel
Audio Cable
Audio Cable
Audio Cable
(not supplied)
(not supplied)
(not supplied)
Audio Cable
If the external analog
(not supplied)
component has only one
Audio Out, connect either
left or right.
DIGITAL IN AUX 1 AUX 2 HDMI IN
DIGITAL IN AUX 1 AUX 2 HDMI IN
ENG
USB FM XM.
USB FM XM.
23