Connecting The Fm Antenna - Samsung HT-TX72 Instruction Manual

Connecting Audio from External Components
OPTICAL : Rear Panel
OPTICAL : Connecting an External Digital Component
Digital signal components such as a Set-Top Box.
1
Connect the Digital Input (OPTICAL) on the Home Theater to the Digital Output of the external digital
component.
2
Press the AUX button on the remote control to select <DIGITAL IN>.
You can also use the FUNCTION button on the main unit.
The mode switches as follows : DVD/CD DIGITAL IN
24
Optical Cable
(not supplied)
AUX 1 AUX 2 HDMI IN USB FM XM.

Connecting the FM Antenna

(Con't)
SPEAKERS OUT
(IMPEDANCE 3§ )
1
Connect the FM antenna supplied to the FM 75 COAXIAL Jack.
2
Slowly move the antenna wire around until you find a location where reception is good, then fasten it
to a wall or other rigid surface.
• This unit does not receive AM broadcasts.
Cooling Fan
The cooling fan supplies cool air to the unit to prevent overheating.
SPEAKERS
(IMPEDANCE
FM Antenna (supplied)
Please observe the following cautions for your safety.
Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside the
unit may rise and may damage it.
Do not obstruct the cooling fan or ventilation holes. If the cooling fan or ventilation holes are
covered with a newspaper or cloth, heat may build up inside the unit and fire may result.
ENG
25