Samsung HT-TX72 Instruction Manual page 32

XM Satellite Radio
XM Display Mode
The XM features described here only operate when the optional XM antenna is connected to the main unit.
Press the XM DISPLAY button.
Each time the XM DISPLAY button is pressed, the mode changes as follows:
CHANNEL NAME/NUMBER
SIGNAL STRENGTH
• When the Channel Name/Number is displayed :
• When the Channel Category is displayed :
• When the Artist Name/Song Title is displayed :
• When the Signal Strength is displayed :
• The front panel display can indicate up to 10 alphanumeric characters at once. If the
information contains more than 10 characters, the information scrolls from right to left.
• If the information contains a character that cannot be recognized by the unit, the character will
be displayed with an underbar < * >.
Checking the XM Signal Strength
Press the XM DISPLAY button until <Signal> is displayed.
The display changes as shown below according to the receiving condition.
Display
GOOD
MARGINAL
WEAK
NO
Checking the Radio ID
Press the Cursor
The Radio ID is displayed. The ID below is just an example.
• To sign up for an account with the XM Satellite Radio service, an XM Satellite Radio ID
number is required. Follow the procedure above to check your ID number, and then access the
website at "http://activate.xmradio.com" or call "1-800-XM-RADIO(1-800-967-2346)" with a
major credit card to sign up.
62
(Con't)
CHANNEL CATEGORY ARTIST NAME/SONG TITLE
Condition
Signal strength is good
Signal strength is marginal
Signal strength is poor
Loss of signal
, button (or button on the main unit) to select channel <o>.
XM Search Mode
The XM features described here only operate when the optional XM antenna is connected to the main unit.
Press the XM SEARCH button.
Each time the XM SEARCH button is pressed, the mode changes as follows:
CHANNEL SEARCH
• Channel Search Mode :
Press the TUNING/CH (or
unit) to move to the desired channel.
• Category Search Mode :
Press the TUNING/CH (or
unit) to select the channel within the selected category.
• Preset Search Mode :
Press the TUNING/CH (or
unit) to select the channel within the memorized
channels.
CATEGORY SEARCH PRESET SEARCH
button on the main
,
button on the main
,
button on the main
,
ENG
63