Speaker Installation - Samsung HT-TX72 Instruction Manual

Connecting the Speakers
HT-TX72
Rear Speaker (R)
Front Speaker (R)
HT-TX75
Rear Speaker (R)
Front Speaker (R)
14
(Con't)
Center Speaker
Rear Speaker (L)
SPEAKER
STAND
Subwoofer
Front Speaker (L)
Center Speaker
Rear Speaker (L)
Subwoofer
Front Speaker (L)

Speaker Installation

With the HT-TX72 front speakers and HT-TX75 front/rear speakers, you have the option of installing the speakers on
Stands, or directly to the Stand Base.
Speaker Components
(HT-TX72/HT-TX75 only)
SPEAKER STAND STAND BASE
How to Install the Speaker on the Stand
1 2 1
2
3
3 4
4
5
6
5 6
How to Install the Speaker on the Stand Base
1 2 1
2
3
3
Screw (A) Screw (B)
Turn the STAND upside-down and connect it to
the STAND BASE.
Insert two screws (A) into the two holes marked with arrows
using a screwdriver as shown in the illustration.
Insert a screw (B), into the hole on the rear of the Speaker
STAND.
Connect the assembled stand to the SPEAKER.
Insert another screw (B) into the hole on the rear of the
speaker using a screwdriver as shown in the illustration.
This is the SPEAKER successfully assembled with
the Stand.
• Make sure that the speaker is installed on a flat and stable area.
Otherwise it may be easily knocked over.
Connect the SPEAKER with the STAND BASE.
Insert the screw (B) into the hole on the rear of the speaker
using a screwdriver as shown in the illustration.
This is the SPEAKER successfully assembled with
the Stand Base.
ENG
15