Connecting External Components; Connecting The Fm Antenna - Samsung HT-Q100W Instruction Manual

Connecting External Components

Connecting an External Digital / Analog Component
Example: Digital signal components such as a Set-Top Box or CD Recorder.
Analog signal components such as a VCR.
Optical Cable
(not supplied)
1
Connect the Digital Input (OPTICAL) to the Digital Output on the external digital component.
2
Connect AUX (Audio) In on the Home Theater to Audio Out on the external analog compo-
nent.
•
Be sure to match connector colors.
3
Press AUX on the remote control to select 'D.IN / AUX' input.
•
Each time the button is pressed, the selection changes as follows: D.IN
•
You can also use the FUNCTION button on the main unit.
The mode switches as follows: DVD D.IN
•
You can connect the Video Output jack on your VCR to the TV, and connect the Audio
Note
Output jacks on the VCR to this product.
19
Audio Cable
(not supplied)
If the external analog compo-
nent has only one Audio Out,
connect either left or right.
AUX
AUX USB FM

Connecting the FM Antenna

FM Antenna (supplied)
1
Connect the FM antenna supplied to the FM 75Ω COAXIAL terminal.
2
Slowly move the antenna wire around until you find a location where reception is good, then fas-
ten it to a wall or other rigid surface.
Cooling Fan The cooling fan supplies cool air to the unit to prevent overheating.
Please observe the following cautions for your safety.
•
Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside the unit could rise
and may damage it.
•
Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes are covered with a
newspaper or cloth, heat may build up inside the unit and fire may result.)
•
This unit does not receive AM broadcasts.
Notes
ENG
20