Installing The Dvd Player; Connecting The Video Out To Tv - Samsung HT-Q100W Instruction Manual

Installing the DVD player

1
Separate the rear cover(A).
2
Remove the 1 screw of the cover(B).
3
Put the speaker cable connected to the
Speaker OUT port into the left groove.
Put the cables connected to the Video OUT,
4
Component OUT and Audio IN ports into
the right groove.
5
Fasten the 1 screw on the cover(B).
6
Close the rear cover(A).
15
(A)
(B)

Connecting the Video Out to TV

Choose one of the three methods for connecting to a TV.
METHOD2
METHOD 3
METHOD 1 .......
Composite Video (Good Quality)
- Connect the supplied video cable from the VIDEO OUT jack on the back panel of the system
to the VIDEO IN jack on your TV.
METHOD 2 .......
Component (Better Quality)
- If your television is equipped with Component Video inputs, connect a component video cable
(not supplied) from the Pr, Pb and Y jacks on the side panel of the system to the corresponding
jacks on your TV.
METHOD 3 .......
HDMI (Best Quality)
- Connect the HDMI out to the HDMI input on your TV.
• This product operates in Progressive scan mode(480p Only ) for Component Output.
Note
•
If the TV only supports a resolution of 576i(480i), the screen may be divided into 2 screens, or dis-
play nothing.
• After making the video connection, set the Video input source on your TV to match the corre-
sponding Video output (HDMI, Component or Composite) on your Home theater. See your TV
owner's manual for more information on how to select the TV's Video Input source.
ENG
METHOD 1
(supplied)
TV
16