Connecting Your System To The Power Supply; Before Using The Dvd Player - Samsung HT-DL70D Instruction Manual

Connecting your System to the Power Supply

GB
The main lead must be plugged into an appropriate socket.
Before plugging your system into an AC outlet, you must check the voltage.
1. Plug the AC Cord on the rear of the system into an appropriate outlet.
2. Press the On/Standby button to switch your DVD Player system on.
WARNING :
SHOCK HAZARD - DO NOT OPEN.
A V I S :
RISQUE DE CHOC ELECTRIQUE - NE PAS OUVRIR.
R-REAR-L WOOFER CENTER
6 3 6
SPEAKERS
Listening on headphones
Use headphones for private listening pleasure (not supplied).
Connect the headphones to the HEADPHONES jack of the front panel.
• No sound is produced from the speakers.
• To prevent hearing damage, do not raise the volume level excessively when using headphones.
13
AV OUT VIDEO VIDEO S-VIDEO S-VIDEO ANTENN ANTENNA A
Y/C
AM
COMP.
R-FRONT-L
AUX IN AUX IN
VIDEO OUT VIDEO OUT
L
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
R
6
SPEAKERS
HT-DL80D only
HEADPHONE jack

Before Using the DVD Player

Your DVD player is capable of playing DVD, VCD, and CD discs.
User instructions may vary depending on the type of disc. Read the instructions
carefully before use.
1
Turn on the power Select a video mode by
to your DVD player pressing the TV/VIDEO
Prepa-
and TV. button on the TV.
rations
before
use
•
The "WAIT" message that appears on the display for about seven to eight seconds when
turning on the power or selecting a DVD function indicates a stabilization period for
optimizing the condition of your DVD player. While the message is being displayed, other
buttons remain inactive.
•
When the power is not turned on, press down the Stop (
over 5 seconds.
The product will be initialized to its optimum state.
•
Certain operational features such as the Speaker mode, Test tone, Volume, etc.
will not be displayed on the TV screen.
TV System Selection
With the power turned off, press and hold (for more than 2 seconds)
the button on the main unit.
•
The display on the main unit switches as follows: NTSC
Then release the button to select the system of your TV.
•
Different countries use different types of TV broadcast systems, video, audio and
channel systems.
Example : The player cannot playback NTSC-encoded DVD with PAL-TV.
2 3
Press the DVD button
to select the DVD input
function.
DVD
) button on the main unit for
PAL SECAM (OPTION).
GB
14