Controlling A Tv With The Remote; Connecting Your System To The Power Supply - Samsung HT-DM550 Instruction Manual

Controlling a TV with the Remote

You can use the remote control to operate other manufactures' TV.
1
Turn on the TV.
2
Point the DVD's remote at the TV.
3
While holding the
code for your brand.
•
If there is more than one code listed in the table,
enter one at a time to determine which code works.
example : For SAMSUNG 1TVs
While holding down the
enter
4
If the TV turns off, setup is complete.
•
Now, you can perform the following operations on the TV.
TV
VOLUME +/–
TV/VIDEO
CHANNEL +/– : Change the channels.
•
Manufacturers' codes are subject to change without notice. If they are changed, this
remote control cannot operate the equipment.

Connecting your System to the Power Supply

The main lead must be plugged into an appropriate socket.
Before plugging your system into a main socket, you must check the voltage.
Check the position of the voltage selector on the rear of the system
1. Plug the main lead (marked AC Cord on the rear of the system) into an appropriate socket.
2. Press the On/Standby button to switch your DVD Player system on.
13
TV
button down, enter the
TV
.
: Turn on or off the TV.
: Adjust the volume.
: Set the input mode (either TV or VIDEO)
button,
(OPTIONAL).
Manufacturer CODES
Samsung 01~06,32
Akai 12
FIisher 12
Grundig 09,17,21
Hitachi 11,13,14,24
JVC 32
LG 02,30
Mitsubishi 02,16
Mival 29
Nokia 23
Nordmende 13,14,24
Panasonic 08,23~27
Philips 02,20,22
Saba 13,14,22~24
Sanyo 12,16
Schneider 02
Sharp 10,31
Sony 15,16
Telefunken 14,24,28
Thomson 13,14,24,33,34
Toshiba 07,16~19,21