Controlling A Tv With The Remote; Connecting Your System To The Power Supply - Samsung HTSK6 Instruction Manual

Controlling a TV with the Remote

You can operate your TV by adjusting the DVD remote signal .
1
Turn on the TV.
2
Point the DVD's remote at the TV.
3
While holding the
code for your brand.
•
If there is more than one code listed in the table,
enter one at a time to determine which code works.
example : For SAMSUNG 1TVs
While holding down the
enter
4
If the TV turns off, setup is complete.

Connecting your System to the Power Supply

The AC Cord must be plugged into an appropriate socket.
Before plugging your system into an AC outlet, you must check the voltage.
1. Plug the AC Cord on the rear of the system into an appropriate outlet.
2. Press the On/Standby button to switch your DVD Player system on.
17
TV
button down, enter the
TV
button,
.
Code Brand Code
01 SAMSUNG 1 16
02 SHARP 2 17
03 SONY 18
04 MAGNAVOX 19
05 SANYO 1 20
06 LG 2 21
07 RCA 22
08 LG 1 23
09 TOSHIBA 24
10 HITACHI 25
11 JVC 26
12 PANASONIC 1 27
13 MITSUBISHI 2 28
14 SAMSUNG 2 29
15 SAMSUNG 3
•
The remote may not be able to
control every model TV of the
brands listed.
Brand
SHARP 1
ZENITH
LG 3
DAEWOO 8
SANYO 2
EMERSON
SHARP 3
SAMSUNG 4
MATSUSHITA
NOBLEX
TELEFUNKEN
NEWSAN
LOEWE
RCA2