7.1ch blu-ray home entertainment system (87 pages)
Summary of Contents for Samsung HT-DL200
THIS APPLIANCE IS MANUFACTURED BY: Instruction Manual V I D E O AH68-01008B DIGITAL HOME THEATER SYSTEM HT-DL200 Volume Function Phones COMPACT COMPACT DOLBY D I G I T A L DIGITAL AUDIO DIGITAL VIDEO V I D E O...
(furniture), with enough space around it for ventilation (7~10cm). Make sure the ventilation slots are not covered. Do not stack other, or heavy devices on top over the player. Do not place the player on amplifiers or other equipmentwhich may become hot.
• Many DVD discs are encoded with copy protection. Because of this, you should only connect your DVD player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from copy-protected DVD discs.
IN) to the VIDEO OUT connector. Video/Audio Cable AM Antenna FM Antenna Voltage Selector(option) AM Antenna Connector FM Antenna Connector S-Video Output Connector If the TV is equipped with an S-Video input connector (S-VIDEO IN), connect it to the player's S-Video output jack. User's Manual...
The remote control can be used up to Remove the battery cover on approximately 23 feet/7 meters in a straight line. It can also be operated at a horizontal angle of the back of the remote by up to 30° from the remote control sensor.
Component Video (Best Quality) If your television is equipped with Component Video inputs, connect a component video cable (not supplied) from the Pr, Pb and Y jacks on the back panel of the system to the corresponding jacks on your television.
FM antenna. (About the cooling fan) A cooling fan is mounted on the rear panel of the center unit to For safety, observe the following carefully. prevent abnormal temperature inside the center unit, thus assuring •...
Check the position of the voltage selector on the rear of the system (OPTIONAL). 1. Plug the main lead (marked AC Cord on the rear of the system) into an appropriate socket. 2. Press the On/Standby button to switch your DVD Player system on.
Press the Mute button during playback. • This operation may be useful when you need to greet the guests or answer the telephone. If the player is left for more than 3 minutes in pause mode, it will stop. ANGLE indicator...
Forward/Reverse Searching During playback, you can search quickly through a chapter or track for a specific scene or tune. High-Speed Playback Press the button. Each time the button is pressed Each time the PLAY • playback (reverse playback) is possible on DVDs.
Each time the Repeat button is pressed • Repeat playback operation is not possible with version 2.0 VCD discs if PBC is turned on. To operate this feature, press the MENU button, and then select "PBC OFF". A B Repeat Playback...
Program Playback Use this function with video and music CDs to play the tracks in a particular order. To Program Tracks in a particular order Press the Program button. Press the Enter button then use the Number buttons to select the desired title.
This function only works with discs on which multiple angles have been recorded. • During playback, press the Angle button to select the desired angle in 1/3, 2/3, 3/3, normal, in that order. To move directly to a title, chapter, or time Press the Go To button.
: Move Setup : Exit Select when you want to watch a 16:9 screen ratio DVD movie on a TV with a 4:3 ratio screen. You can see the full 16:9 picture, but black bars will appear at the 4:3LB top and bottom of the screen.
This function only works when in the Dolby Digital mode. Controlling a TV with the Remote The remote can also be set up to control most TVs. To program the remote, use the code that corresponds to your brand. Point the DVD’s remote at the TV.
Setting up Delay Time from 00~15ms R DEL D I G I T A L Rear Speaker Delay Time • SMALL: When this setting is selected, low frequencies of below 200 Hz are assigned to the subwoofer only. • USE: Select when using speakers. •...
VCR could be Dolby Surround encoded 2-channel material that can be decoded into 4-channel sound using the Dolby Pro Logic mode). Pro Logic mode can also be enjoyed when in DVD mode or when playing Dolby Digital or PCM material that are Dolby Surround encoded.
(total 4 channels)into 2 channels. The Dolby Pro Logic decoder built in this system decodes these 2 channel signals into original 4 channel signals — matrix-based multichannel reproduction,and allows you to enjoy a realistic stereo sound in your listening room.
Listening to the Radio You can listen to the chosen band (FM, AM broadcast stations) by using either the automatic tuning or manual tuning operation. Remote Press the Tuner(Band) Select a broadcast station. Control button. Unit • The selection toggles back...
When condensation forms inside the player, remove the disc is not produced; the disc tray and let the player stand for 1 or 2 hours with the power on. opens 2-5 seconds later. (You can use the player after the condensation disappears.) Sound quality is •...
Is there any dirt on the disc, or is the disc damaged? and quality is poor. • It may not be possible to play some DVD discs due to poor manufacture. • When a dark scene changes to a bright scene during playback, the screen may flicker vertically.
LD, CDG, CD-I, CD-ROM and DVD-ROM cannot be played on this player. • DVD discs purchased abroad may not play on this player. If such discs are played, a "WRONG REGION CODE" message appears on the TV screen. Max. Playing Time Approx. 240 min. (Single-sided) Approx.
Recorded onto some DVD discs are scenes which have been simultaneously shot from a number ANGLE of different angles (the same scene is shot from the front, from the left , from the right , etc.). With such discs, the Angle button can be used to change the angle of view for specific scenes.