Program Playback - Samsung HT-DL70D Instruction Manual

Program Playback

Use this function to program chapters or tracks in a particular order.
GB
To Program Tracks in a particular order
1
Press the Program button.
Press the Enter button, then
use the Number buttons to
select the desired title.
•
You can also use the Left/Right
(
PROGRAM MENU SELECT : ENTER
TITLE CHAPT TITLE CHAPT
1 6
2 7
3 8
4 9
5 10
PREVIOUS NEXT
PLAY : FINISH : PROGRAM
4
Press the Enter button. At this time, you can continue
programming if you want to.
•
The selected track number is •
programmed and the cursor
moves to the next number.
PROGRAM MENU SELECT : ENTER
TITLE CHAPT TITLE CHAPT
1 1 2 6
2 7
3 8
4 9
5 10
PREVIOUS NEXT
PLAY : FINISH : PROGRAM
To Leave the Programming Mode
21
Program
2 3
Press the Enter button, then use
the Number buttons to select the
desired chapter.
•
You can also use the Left/Right
/ / / ) button. ( / / /
PROGRAM MENU SELECT : ENTER PROGRAM MENU SELECT : ENTER
TITLE CHAPT
TITLE CHAPT TITLE CHAPT
1 1 6 1 1 2
2
2 7
3 8 3
4 9 4
5 10 5
PREVIOUS
PREVIOUS NEXT
PLAY : FINISH : PROGRAM PLAY :
5
To Playback the
Tracks in
Programmed Order
When programming more than
10 tracks, select and
NEXT
then press the Enter button.
Press the Play/Pause
The program selection screen
( ) button.
where you can program up to
10 additional tracks appears.
PROGRAM MENU SELECT : ENTER
TITLE CHAPT TITLE CHAPT
1 1 2 6 4 1
2 1 2 7 6 2
3 1 7 8 3 4
4 2 3 9 5 5
2 1
5 4 10 2
PREVIOUS NEXT
PLAY : FINISH : PROGRAM
Press either the Program or Stop ( ) button.
To Change the Program
Press the Up/Down (
button to select the track
number to be changed.
) button.
TITLE CHAPT
6
7
8
9 Press the Enter button.
10
NEXT
FINISH : PROGRAM
•
The cursor moves to the
number below.
To delete the entire Program
•
Press the Stop (
•
Press the Stop (
•
Press the Open/Close (
The disc tray will open and then close.
The program will then be deleted.
When you have entered a
wrong number
Press the Clear button.
•
When you want to delete a selection during
programming, select the track (or chapter, or title) to be
deleted and then press the Clear button.
1 2
/ ) Press the Enter button to
select the title or chapter to be
changed.
•
The cursor moves to the next
number when the Enter button
is pressed again.
4 5
Repeat steps 1-4 above to
change the program.
) button twice during playback.
) button once when in the Stop mode.
) button on the main unit.
Clear
GB
3
Press the Clear button and
then press the Number
buttons.
•
You can also use the Left/Right
( / ) button.
•
You can program or change
particular tracks for VCD or
CD discs in the same manner.
•
Depending on the disc, the
PROGRAM function may not
work.
22