Table of Contents
Advertisement
Controlling a TV with the Remote
You can operate your TV by adjusting the DVD remote signal.
1
Turn on the TV.
2
Point the DVD's remote at the TV.
TV
3
While holding the
button down, enter the
code for your brand.
•
If there is more than one code listed in the table,
enter one at a time to determine which code works.
example : For SAMSUNG 1TVs
While holding down the
enter
.
4
If the TV turns off, setup is complete.
•
Now, you can perform the following operations on the TV.
TV
: Turn on or off the TV.
VOLUME +/–
: Adjust the volume.
TV/VIDEO
: Set the input mode (either TV or VIDEO)
CHANNEL +/– : Change the channels.
•
Manufacturers' codes are subject to change without notice. If they are changed, this
remote control cannot operate the equipment.
Connecting your System to the Power Supply
The AC Cord must be plugged into an appropriate socket.
Before plugging your system into an AC outlet, you must check the voltage.
1. Plug the AC Cord on the rear of the system into an appropriate outlet.
2. Press the On/Standby button to switch your DVD Player system on.
13
Manufacturer
Samsung
01~06,32
Akai
FIisher
Grundig
09,17,21
Hitachi
11,13,14,24
JVC
LG
Mitsubishi
Mival
Nokia
TV
Nordmende
13,14,24
button,
Panasonic
08,23~27
Philips
02,20,22
Saba
13,14,22~24
Sanyo
Schneider
Sharp
Sony
Telefunken
14,24,28
Thomson
13,14,24,33,34
Toshiba
07,16~19,21
AV OUT
RGB
COMPOSITE
SUBWOOFER
PREOUT
Before Using the DVD Player
CODES
12
1
12
Turn on the power
32
to your DVD player
02,30
Prepe-
02,16
and TV.
rations
29
before
23
use
12,16
•
The "WAIT" message that appears on the display for about 4~5 seconds when turning on the
02
power or selecting a DVD function indicates a stabilization period for optimizing the condition of
10,31
your DVD player. While the message is being displayed, other buttons remain inactive.
15,16
•
When the power is not turned on, press down the Stop (
seconds.
The product will be initialized to its optimum state.
•
Some operational features such as the Speaker mode, Test tone, Volume, etc. will not be
displayed on the TV screen.
TV Broadcast System
• This device is designed to work with the PAL video format.
• For normal playback, the video format a DVD disc is recorded in must
coincide with your TV's video format.
Your DVD player is capable of playing DVD, VCD, and CD discs.
User instructions may vary depending on the type of disc. Read the instructions
carefully before use.
2
Select a video mode by
pressing the TV/VIDEO
button.
TV
TV/VIDEO
3
Press the DVD button
to select the DVD input
function.
DVD
) button on the main unit for over 5
14
Advertisement
Table of Contents
