Industrial Scientific Ventis MX4 Product Manual page 26

Ventis™ MX4 Product Manual
Configuration Process
Display and Options
Security Code Set Screen
Valid values: 000 to 999.
Increment value: one
Language Selection Screen
Options
E = English
F = French
d = German
Always-on Set Screen
Options
0 = Disable/off
1 = Enable/on
Shutdown In Alarm Screen
Options
0 = Disallows shutdown
1 = Allows shutdown
Alarm on Dock Screen
Options
0 = Disable/off
© 2018 Industrial Scientific Corporation
Instructions
A security code value of 000 permits all monitor users to enter
configuration mode and gain access to change the monitor's settings. A
value other than 000 will restrict access to the configuration mode; it will
also restrict access to the shutdown process for an instrument that is
configured for "always on".
Press ENTER to edit the value, if needed; press repeatedly or hold
down to speed the increment pace.
Press ON/OFF/MODE to set the value and advance to the Language
Selection Screen.
Allows the choice of display languages as applied to select screens.
Press ENTER to edit the value, if needed.
Press ON/OFF/MODE to set the value and return to the LEL Type Set
Screen.
When enabled, the shutdown process is security-code protected only if
the security code is not equal to 000. If the code is set to anything other
than 000, the user will be prompted to enter the unit's security code to
complete the shutdown process.
Press ENTER to edit the value, if needed.
Press ON/OFF/MODE to set the value and advance to the next
configuration mode screen.
Disallow or allow operator-activated shutdown when the unit is in alarm.
Press ENTER to edit the value, if needed.
Press ON/OFF/MODE to set the value and advance to the next
configuration mode screen.
Disable or enable alarm indicators when the unit is docked.
Press ENTER to edit the value, if needed.
Press ON/OFF/MODE to set the value and advance to the next
configuration mode screen.
26