Industrial Scientific Ventis MX4 Product Manual page 10

Ventis™ MX4 Product Manual
Boot-Up Screen
All possible screen images.
It is helpful to view the boot-up screen in sections. The top and bottom rows each contain icons. The main function of
the middle section, in gas monitoring mode, is to communicate gas concentration readings. Definitions for all icons,
gas name abbreviations, gas measurement units, and other indicators are provided below. Where applicable, display
variations are noted.
Top Row Icons Definition
Status: indicates no monitor or sensor faults.
Warning: indicates monitor or sensor fault.
Zero: communicates zero status (e.g., zero results, zero in-progress, etc.).
Gas Cylinder: communicates calibration related information (calibration due, calibration
apply gas, etc.).
Clock: indicates a process is in-progress.
Calendar: communicates overdue warnings for service items (calibration, bump testing,
etc.).
Alarm: indicates an alarm causing condition.
Low level audio alarm is on.
High level audio alarm is on.
Peak: displayed when peak detection values are viewed.
Alpha-numeric Definition
display values
Carbon Monoxide (CO)
Methane (CH
Sulfur Dioxide (SO
Lower Explosive Limit. Display variations:
"LIE" (French)
Oxygen (O
Nitrogen Dioxide (NO
© 2018 Industrial Scientific Corporation
Gas Monitoring Screen
Sample screen in gas monitoring mode.
NOTE: Display screens featured throughout this manual include the "pump" icon.
Similar in appearance to a fan, it indicates an aspirated monitor is in use. For a
diffusion monitor, the pump icon does not appear on the display.
)
4
)
2
"LEL" (English)
"UEG" (German)
)
2
)
2
10