Uplift Desk UDA121 Instructions

®
E3 Compact Stand Up Desk Converter Instructions
UDA121

Package contents

Main unit Allen wrench
(4mm)
Step 1
Clear off the surface where you intend to use the unit.
Ensure there is at least a 28 inch wide by 14 inch deep
space for it.
Step 2
Unlock the riser platform by sliding the tab toward the pic-
ture of the padlock that is unlocked. This tab unlocks the unit,
and locks it in place when in the lowest position.
Hold surface with both hands and lift.
Step 3
This product is designed to be easily lifted and lowered. To
keep it up at a particular height, use the locking hook near
the base of the unit.
Lift and move the platform to your desired height. Loosen
the lock tab with the included Allen wrench, slide it up to the
peg, then flip the lock tab over it. Now re-tighten the lock
tab with the Allen wrench. This will keep the platform at your
preferred height and create a height-adjustable workspace
for you.
You can now place your desktop items such as a laptop or
tablet on the main unit's stable worksurface.
Step 4
To lower the main unit, flip the locking hook off the peg, grasp
each side and with a gentle pressure, lower the converter.
You can lock it in this position to prevent accidental raising
of the converter by sliding the tab toward the picture of the
padlock that is locked.
UPLIFT Desk • 1-800-349-3839 • info@upliftdesk.com • www.upliftdesk.com
UDA121/R01