Connections
Installing the Speakers on the Tallboy Stand
1.
Connect the Stand Pole to the Stand Bracket.
2.
Insert and tighten three large screws (5x15, For connecting
Stand Pole & Stand Bracket) into the three holes on the Stand
Bracket as shown in the illustration.
3.
Straighten the speaker wire and route it through the Stand Pole.
4.
Connect the Stand Pole to the Stand Neck and
Stand Base.
- Make sure all holes are properly connected,
if not, the stand will fall down.
20
English
Connecting the Speakers
4
Stand Neck
1
Stand Bracket
Stand Pole
2
3
Stand Base
Stand Pole