Playing Back A Usb Storage; Listening To Radio - Samsung AH68-02262R User Manual

Playing back a USB Storage

You can use the USB connection to play multimedia
fi les (MP3, JPEG, DivX, etc) downloaded from the
USB storage device.
1. Move to the home menu.
2.
In Stop mode, connect the USB storage device
to the USB port on the side of the product.
The message "Do you want to access the
device?" will be displayed.
3. Press the ◄► button to select Yes, then
press the ENTER button.
4. Press the RED (A) button or the BLUE (D)
button. If you pressed the RED (A) button,
go to Step 5. If you pressed the BLUE (D)
button, go to Step 4
Please activate Internet@TV service
to enjoy a variety of Internet Services.
CD
USB
a
USB Change Device c
5. Press the ▲▼ buttons to select USB, and
then press the ENTER button.
6. Press the ◄► buttons to select the desired Videos,
Music, or Photos, and then press the ENTER
button. Go to Step 7.
4 . Press the BLUE (D) button. The screen
-1
below appears. Go to 5
Please activate Internet@TV service
to enjoy a variety of Internet Services.
USB
USB
5 -1 . Press the ◄► buttons to select USB, and
then press the ENTER button.
6 -1 . Press the ▲▼ buttons to select the desired
Videos, Music, or Photos, and then press
the ENTER button.
F
.
-1
You Tube
internet radio
"
Safely Remove USB d View Devices Enter
-1 .
"
d Home Enter
7. For playing back Video, Music or Photo
fi les, see pages 46~54.
✎
NOTE

You must remove the USB storage device
safely (by performing the "Safe to Remove
Hardware" function) to prevent possible
damage to the USB memory. Press the MENU
button to move to the main screen, press the
YELLOW (C) button, and then press the ENTER
button.

When the Audio-CD (CD-DA), MP3 and JPEG
fi les are in stop mode, the FULL SCREEN button
on the remote control does not work.

If you insert a disc when playing a USB storage
device, the device mode is changed to "DVD
or CD" automatically.

To listen to your music fi les with 5.1 channel sound,
you must set the Dolby Pro Logic II mode to Matrix.
(See page 54)

Listening to Radio

Using buttons on the Remote Control
1. Press the FUNCTION button to select FM.
2. Tune in to the desired station.
Automatic Tuning 1 : When the # $ button
•
is pressed, a preset broadcast station is selected.
•
Automatic Tuning 2 : Press and hold the
TUNING/CH (
search for active broadcasting stations.
•
Manual Tuning : Press the TUNING/CH
( ) button to increase or decrease the
frequency incrementally.
) button to automatically
55
English