Setioalarmconfig; Getioalarmconfig - Foscam CGI User Manual

setIOAlarmConfig

Function
Set IO alarm config
privilege admin
Usage
/cgi-bin/CGIProxy.fcgi?cmd=setIOAlarmConfig
isEnable
Param
linkage
alarmLevel
snapInterval
triggerInterval
scheduleN
Return
Set result(0-success,-1-error)
Note
Example
/cgi-bin/CGIProxy.fcgi?cmd=setIOAlarmConfig&usr=admin&pwd=&isEnable=1
&linkage=16&
4&schedule1=1024&schedule2=1024&schedule3=1024&schedule4=1024&sch
edule5=1024&schedule6=1024

getIOAlarmConfig

Function
Get IO alarm config
privilege admin
Usage
/cgi-bin/CGIProxy.fcgi?cmd=getIOAlarmConfig
Param
None
isEnable
Return
linkage
alarmLevel
snapInterval
triggerInterval
Copyright@ Shenzhen Foscam Intelligent Technology Limited
Enable state
IO alarm linkage
Alarm level,0-Low,1-high,trigger alarm
Interval for snap picture
Interval for trigger alarm again,P.s.The true value of
triggerInterval time is the value of the cgi set add 5s.
N(0-6), alarm schedule
snapInterval=2 & alarmLevel=1 &triggerInterval=5 & schedule0=102
Enable state
IO alarm linkage
Alarm level
Interval for snap picture
Interval for trigger alarm again ， P.s.The true value of
triggerInterval time is the value of the cgi get add 5s.
Foscam IPCamera CGI User Guide
bit0:Ring
bit1:Send mail
bit2:Snap picture
bit3:Record
bit0:Ring
bit1:Send mail
bit2:Snap picture
bit3:Record
37