Changing The Screen Size - Samsung SPN4235 Owner's Instructions Manual

Changing the Screen Size

When you press the ASPECT button on the remote control, the PDP's screen mode should appear in
sequence. The screen displays in this order: Wide, Panorama, Zoom1, Zoom2, Normal.
Note
• If you watch a still image or the Normal (4:3) mode for a long time (over 2 hours), an image may
be burned onto the screen. View the monitor in Wide or Panorama mode as much as possible.
W W ide ide
Sets the picture to 16:9 wide mode.
Wide
Panorama
Converts regular 4:3 aspect ratio screen to
wide screen.
Panorama
Zoom1
The screen size when Wide screen is vertically
enlarged.
Zoom1 Up/Down
Notes
• In TV, VIDEO, S-VIDEO and Component(480i) modes, all screen modes can be selected.
(Wide Panorama Zoom1 Zoom2
• In PC/DVI mode, only Wide & Normal modes can be selected.
• In Component(480p, 720p. 1080i) modes, Panorama mode can't be selected.
• In Component(480p, 720p. 1080i) modes, you can move the picture on screen by pressing
the Up or Down button. (All screen modes)
• Changing the screen size to Normal, Zoom1 or Zoom2 during PIP mode will cause the PIP
50
window to disappear.
Zoom2
The screen size when the Zoom1 screen is
vertically enlarged.
Zoom2
Up/Down
Normal (4:3)
Sets the picture to 4:3 normal mode.
Normal
Normal).

Changing the Screen Size

Still
Press the Still button on the remote control to freeze a
moving picture. Press again to cancel.
51