Customizing the Picture
You can use the on-screen menus to change the Contrast, Brightness, Sharpness, Color,
and Tint settings of your PDP.
Press the MENU button, then press the ENTER
1
button.
Press the UP or DOWN button to select "Adjust",
2
then press the ENTER button.
You will also see the items "Contrast", "Brightness",
"Sharpness", "Color" and "Tint".
Press the UP or DOWN button to select the item you
3
wish to change.
Press the LEFT or RIGHT button to change the value
4
of the item.
Press the MENU button to exit.
5
Note
• In the PC/DVI mode, you can't adjust the Color and Tint.
40
Picture
Mode
Custom
Adjust
Color Tone
Custom
DNIe
On
Move
Select
Menu
Picture
Mode
Custom
Adjust
Color Tone
Normal
DNIe
On
Move
Enter
Menu
Adjust
Contrast
80
Brightness
50
Sharpness
50
Color
50
Tint
R 50
G 50
Move
Adjust
Menu
Contrast
82
Using Automatic Picture Settings
Your PDP has automatic picture settings that allow you to adjust the video display easily.
Press the MENU button, then press the ENTER
1
button.
Quick way to access the picture setting: Just press the "P.MODE"
button under the cover of the remote control.
Press the LEFT or RIGHT button to select "Custom",
2
"Dynamic", "Standard" or "Movie" picture setting.
• You can select "High", "Middle", "Low" or
"Custom" in PC/DVI mode.
Press the MENU button to exit.
3
Picture
Mode
Custom
Adjust
Color Tone
Custom
DNIe
On
Move
Select
Menu
Picture
Mode
Dynamic
Adjust
Color Tone
Custom
DNIe
On
Move
Select
Menu
41