Use Voicemail - HP AT&T Obsidian User Manual

Make a call from Contacts
To make calls from the contacts list:
1. Press Send.
2. Tap the contact name.
3. Tap the number twice or press Send twice to place a call.
TIP: If you have a long list of contacts, enter the first few letters of a contact's name. Your Obsidian
searches the entire contact list to display the name.

Use voicemail

To call voicemail:
1. Press Send.
2. On the dialer screen, using the keyboard, press and hold 1 to automatically call voice mail.
NOTE:
to complete setup.
Use the speakerphone
You can turn the speakerphone on during a call.
On the dialer screen, tap Speaker On to turn the speaker on and the earpiece off.
▲
Make a call from a hyperlink phone number
Use a hyperlinked phone number to quickly dial a phone number from an e-mail or text message. A
hyperlinked phone number is underlined in the same manner as a website address.
To dial a hyperlinked phone number from an e-mail or text message:
1. Tap the phone number.
2. Verify the number is correct and add a area code or country code if needed.
3. Tap Call or press Send to dial the number.
Dial international numbers
To dial an international call, dial a country code before the phone number:
1. Press Send.
2. On the dialer screen, using the keyboard, press and hold 0 until the plus (+) sign appears.
3. Using the keyboard, Dial the country code and phone number.
NOTE: You can also insert a plus (+) sign into a contact's phone number for quick dialing.
Make a conference call
To make a conference call:
1. Press Send.
2. Using the keyboard, dial the required number, and then press Send.
To set up your voicemail, using the keyboard, press and hold 1. Follow the voice prompts
Make and receive phone calls 13