Table of Contents
Advertisement
66 Program features
Diagnostics
Parameters
02.01 DI status
(page 114) and
02.21 Freq out
Programmable I/O extensions
The number of inputs and outputs can be increased by using FIO-xx I/O extensions.
The drive I/O configuration parameters include the maximum number of DI, DIO, AI,
AO and RO that can be taken into use with different FIO-xx combinations.
The table below shows the possible I/O combinations of the drive:
JCU Control Unit
FIO-11
FIO-21
FIO-31
For example, with an FIO-21 connected to the drive, parameters controlling DI1...7,
DIO1...4, AI1...3, AO1...2 and RO1...4 are in use.
Settings
Parameter groups
Analogue outputs
(page 158) and
Programmable relay outputs
The drive has two relay outputs. The signals to be indicated by the outputs can be
selected by parameters.
Relay outputs can be added by using FIO-xx I/O extensions.
Settings
Parameter group
14 Digital I/O
Diagnostics
Parameter
02.02 RO status
Fieldbus control
The drive can be connected to several different automation systems through its
fieldbus interface. See chapters
(page 329) and
Control through a fieldbus adapter
(page 113),
(page 114).
Digital
Digital I/O
inputs
(DI)
6
-
1
-
13 Analogue inputs
94 Ext IO conf
(page 148).
(page 113).
Control through the embedded fieldbus interface
02.03 DIO status
Analog
inputs
(DIO)
(AI)
2
2
2
3
-
1
-
-
(page 142),
14 Digital I/O
(page 281).
(page 357).
(page 113),
02.20 Freq in
Analog
outputs
outputs
(AO)
2
1
-
-
(page 148),
Relay
(RO)
2
-
2
4
15
Advertisement
Table of Contents
