[B] Secop (Danfoss) Compressor - Hoshizaki IM-30CNE Service Manual

[b] SECOP (DANFOSS) COMPRESSOR

Ambient Temp. (°C)
Model
Water Temp. (°C)
Cube Hole Diameter
Ice Production (kg/d)
Freeze Cycle Time (min)
Defrost Cycle Time (min)
IM-240NE
Water Consumption (lit/h)
Electric Consumption (W)
Head Pressure [peak] (bar)
Ice Production (kg/d)
Freeze Cycle Time (min)
Defrost Cycle Time (min)
IM-240NE-23
Water Consumption (lit/h)
Electric Consumption (W)
Head Pressure [peak] (bar)
Ice Production (kg/d)
Freeze Cycle Time (min)
Defrost Cycle Time (min)
IM-240WNE
Water Consumption (lit/h)
Electric Consumption (W)
Head Pressure [peak] (bar)
MODEL
IM-240 "N" type
IM-240 "N"-21 type
IM-240 "N"-32 type
Note: The above data are only for reference in servicing. Actual readings may be slightly different
for each product.
Suction Pressure = Peak readings in freezing cycle
Evaporator Inlet Temp. = 5 minutes before completion of freezing cycle
(Ice Production = Capacity when shipped from factory)
(*Values for icemaking water only. Use a cooling tower for cooling water.)
Cube Hole Diameter: 5mm (15mm) for -28, -23, -32 3mm (7mm) for -21
Suction Pressure and Evaporator Temp.
Ambient Temp. (°C)
Water Temp. (°C)
Suction Pressure Peak (bar)
Evaporator Inlet Temp. (°C)
Suction Pressure Peak (bar)
Evaporator Inlet Temp. (°C)
Suction Pressure Peak (bar)
Evaporator Inlet Temp. (°C)
10 21
10 15
5mm(15mm) 5mm(15mm)
230 (240) 210 (230)
15.9 (14.3) 19.5 (16.7)
4.1 (3.7) 2.4 (2.1)
31.3 (34.1) 14.9 (17.2)
1195 1270
14.0 17.0
230 (240) 215 (225)
17.9 (16.0) 19.4 (17.3)
2.1 (2.0) 2.0 (1.9)
31.3 (34.7) 15.3 (17.0)
1250 1250
19.5 19.7
10
10
3.0
-20
3.0
-13
3.0
-23
58
32
21
5mm(15mm)
195 (210)
21.6 (18.9)
2.0 (1.7)
13.9 (15.7)
1320
21.0
205 (215)
20.7 (18.4)
1.8 (1.7)
14.6 (16.2)
1300
19.8
21 32
15 21
3.5 4.0
-19 -18
3.5 4.0
-11 -10
3.5 4.0
-22 -21
38
32
5mm(15mm)
170 (195)
25.3 (20.5)
1.8 (1.7)
12.1 (14.7)
1450
25.0
185 (195)
23.2 (20.6)
1.7 (1.6)
13.2 (14.7)
1300
20.0
50/60Hz
38
32
5.0
-17
5.0
-9
5.0
-20