Installation; Electrical Connections - Hoshizaki IM-21CNE Instruction Manual

ENGLISH
This appliance is not suitable for installation in an area where a water jet could be used.
In some high humidity environments, condensation may form inside the machine and drip onto the floor. Do not install where
the floor can be affected by water.
The location should provide a firm and level foundation for the icemaker.
Do not place anything on top of the icemaker or in front of the louver.
Normal operating ambient temperature should be within 1°C to 40°C. Normal operating water temperature should be within
5°C to 35°C. Operation of the icemaker, for extended periods, outside of these normal temperature ranges may affect
production capacity.
Allow the clearance specified below for proper air circulation and ease of maintenance and/or service should they be required.
[IM-21CNE, 31CNE/CWNE, 45NE/WNE, 65NE/WNE]
Top View
Left
[IM-240NE]
Side View

5. INSTALLATION

Incorrect installation can cause harm to people, animals or other items, for which the manufacturer cannot be held
responsible.
* Place the icemaker in the selected permanent site.
[Except IM-21CNE]
* When attaching the adjustable legs (accessory), level the unit in both the left-to-right
and front-to-rear directions.

6. ELECTRICAL CONNECTIONS

This icemaker requires an earth that meets the national and local electrical code requirements.
Rear
15cm
15cm
ICEMAKER
Front
Top
30cm
Rear
Front
30cm
ICEMAKER
THIS APPLIANCE MUST BE EARTHED
CAUTION
NOTICE
IMPORTANT
Side View
Right
Front
15cm
[IM-45CNE, 240WNE]
Side View
Front
CAUTION
WARNING
4
Top
15cm
Rear
15cm
ICEMAKER
Top
15cm
Rear
15cm
ICEMAKER
[IM-240NE/WNE]
Adjustable Leg