Maintenance - Bosch MIC IP fusion 9000i Installation Manual

MIC IP fusion 9000i
12

Maintenance

Cleaning – Remove power from the device before cleaning. Generally, using a dry cloth for
cleaning is sufficient, but a moist, fluff-free cloth may also be used. Do not use liquid cleaners
or aerosol cleaners.
Note: Do not use water pressure greater than 14 psi to wash the unit.
No User-serviceable Parts
Except for the external wiper blade, the device contains no user-serviceable parts. Contact
your local Bosch service center for device maintenance and repair. In the event of failure, the
device should be removed from site for repair.
On-Site Inspection
It is recommended that the device be inspected on-site every six months to check mounting
bolts for tightness, security, and any signs of physical damage. Inspection of this device shall
only be carried out by suitably-trained personnel in accordance with the applicable code of
practice (for example, EN 60097-17).
The following sticker appears on each side of the MIC camera head, just above the tilt arms, to
warn that the surface may be hot:
Bosch Security Systems Installation Manual
Maintenance | en 33
2018.09 | 1.1 | F.01U.334.820