Advertisement
HP PRO M452 / MFP 477 (CF410/11/12/13 A/X-HP 410 SERIES) TONER CARTRIDGE REMANUFACTUIRNG INSTRUCTIONS
TAB FITS INTO SLOT
29. Place the two halves together.
Lift up on the small white drum gear tab, while pulling the end cap out to align them properly.
30. Place a small piece of a good double-sided tape on the inside of the end cap.
Install the end cap.
© 2017 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
www.uninetimaging.com
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact techsupport@uninetimaging.com
Advertisement
