Edger attachment for use with ry24001 24 v (40 pages)
Summary of Contents for Ryobi ELT400
Page 1
THANK YOU FOR BUYING A RYOBI TRIMMER – EDGER. Your new trimmer – edger has been engineered and manufactured to Ryobi's high standard for dependability, ease of operation, and operator safety. Properly cared for, it will give you years of rugged, trouble free performance.
Page 2
FOR FUTURE REFERENCE 8. USE RIGHT TOOL. Don't force small tool or attachment to do the job of a heavy duty tool. Don't use tool for Due to Ryobi's continued product refinement purpose not intended. policy, product features and specifications can and 9.
Page 3
ASSEMBLY OF COMPONENTS ELT400 ELECTRIC LINE TRIMMER Your Ryobi trimmer is supplied with some components not assembled. To assemble these, proceed as follows: Fig 1 HANDLE ASSEMBLY Adjustable (Fig 1) D-Handle Secure handle to the Trigger Switch trimmer shaft at the...
UTILISATION OF THE TRIMMER AS AN EDGER REPLACEMENT OF THE CUTTING LINE For edging of driveways and paths, transform the CARTRIDGE (Fig 8, 9, 10 & 11) trimmer from the trimmer mode to the edging mode Your trimmer is supplied with a fully disposable as follows.
NOTE: This damage will not be covered under slot of the cartridge ring RYOBI Power Equipment Guarantee. and the other end into the bottom slot. Replace the WARNING: The cutting head continues inner cartridge ring back to rotate after the motor is switched off on to the cartridge.
Page 6
RYOBI NEW ZEALAND PTY. LTD. AUCKLAND: 27 Clemow Drive, Mt Wellington, N.Z. Tel: (09) 573 0230 - Free Call: 0800 279 624 - Fax: (09) 573 0231 - www.ryobi.co.nz Contact during normal business hours. This Guarantee Form Should Be Retained By The Customer At All Times For your record and to assist in establishing date of purchase (necessary for in-guarantee service) please keep your purchase docket and this form completed with the following particulars.