Strobe Diffuser; Using The Diffuser; Diffuser Installation And Removal - Ikelite DS51 Instruction Manual

Strobe Diffuser

Using the Diffuser

The white diffuser can be secured to the front of the DS51 strobe
when softer lighting or a coverage angle of up to 80° is desired. The
diffuser reduces the DS51 light intensity by one full f-stop.

Diffuser Installation and Removal

1. The white diffuser features two protruding tabs for use in installation
and removal. The tabs on the diffuser should be positioned away
from the strobe.
2. Place the diffuser over the front of the strobe. Spread the two tabs
apart, insert the diffuser into the recessed front, and then rotate the
diffuser until it locks into position.
16
Tab
Push and Lift
to Remove
Holes for the
Lanyard
Tab