Testing Communications And Completing Ez Setup - Campbell CR300 series Getting Started Manual

Compact datalogger

Hide thumbs Also See for CR300 series:

Table of Contents

3. Testing communications and

completing EZ Setup

1. Using datalogger support software EZ Setup, access the Communication Test window. This

window is accessed during EZ Setup (see

more information). Alternatively, you can double-click a datalogger from the station list to

open the EZ Setup Wizard and access the Communication Test step from the left side of

the window.

2. Ensure the datalogger is connected to the computer, select Yes to test communications,

then click Next to initiate the test.

3. With a successful connection, the Datalogger Clock window displays the time for both the

datalogger and the computer.

The Adjusted Server Date/Time displays the current reading of the clock for the com-

puter or server running your datalogger support software. If the Datalogger

Date/Time and Adjusted Server Date/Time don't match, you can set the datalogger

clock to the Adjusted Server Date/Time by clicking Set Datalogger Clock.

Use the Time Zone Offset to specify a positive or negative offset to apply to the com-

puter time when setting the datalogger clock. This offset will allow you to set the

clock for a datalogger that needs to be set to a different time zone than the time

zone of the computer (or to accommodate for changes in daylight saving time).

4. Click Next.

5. The datalogger ships with a default QuickStart program. If the datalogger does not have a

program, you can choose to send one by clicking Select and Send Program. Click Next.

6. LoggerNet only - Watch a

The Datalogger Table Output Files window displays the data tables available to be

collected from the datalogger and the output file name. By default, all data tables set

up in the datalogger program will be included for collection. Make note of the Out-

put File Name and location. Click Next.

Check Scheduled Collection Enabled to have LoggerNet automatically collect data

from the datalogger according to a schedule. When the Base Date and Time are in

USB or RS-232 communications

video

or use the following instructions:

3. Testing communications and completing EZ Setup

on page 2 for

Table of Contents