Working With Data - Campbell CR300 series Getting Started Manual

7. Working with data

By default, the datalogger includes three tables: Public, Status, and DataTableInfo. Each of these
tables only contains the most recent measurements and information.
The Public table is configured by the datalogger program, and updated at the scan interval
l
set within the datalogger program, It shows measurement and calculation results as they
are made.
The Status table includes information about the health of the datalogger and is updated
l
only when viewed.
The DataTableInfo table reports statistics related to data tables. It also only updates when
l
viewed.
User-defined data tables update at the schedule set within the program.
l
For information on collecting your data, see
Use these instructions or follow a tutorial to monitor real-time data.
PC200W and PC400 users, click Connect
a datalogger, values from the Public table are displayed. To view data from other tables, click
Add ( ), select a table or field from the list, then drag it into a cell on the Monitor Data tab.
Collecting data (p. 13).
, then Monitor Data. When this tab is first opened for
7. Working with data 11